Cathedral Ceiling Kit for 6" Inner Diameter Chimney Pipe with Flat Top Chimney Cap

Our cathedral ceiling kit includes the components necessary to connect single wall stove pipe to double wall Class-A chimney and vent it through a cathedral ceiling.

Kit Includes

• (1) Stove Pipe Adapter
• (1) Storm Collar
• (1) Chimney Cap with Spark Arrester

You will need 2 more components to complete the kit: the roof flashing and the ceiling support box, please select them in the options on this page.

Individual Parts Description

• Stove Pipe Adapter is the transition piece that connects the single wall stove pipe to the ceiling support box.
• Ceiling Support Box mounts to the ceiling joists or roof (depending on your installation) and allows the chimney to safely pass through the ceiling and into the attic.  Can support a maximum of 50 feet of chimney.  Includes trim to provide a finished look inside the home.
• Roof Flashing provides leak prevention for the roof penetration of the chimney system.
• Storm Collar works together with the roof flashing to provide a waterproof seal where the chimney passes through the roof.
• Chimney Cap tops off the chimney system to keep out rain, snow, leaves, debris, and animals.

Installation Notes

• Single Wall Stove Pipe is not included in this kit and is required to connect your wood stove or other heating appliance to the support box.
• To complete this kit purchase the lengths of pipe needed to run from the support box out the roof.
• If the chimney extends more than 5 feet above the roof an Extended Roof Brace (sold separately) must be installed.

Construction Material

Our double wall Class-A insulated chimney system delivers superior safety and performance.  The 1.18" thick high density ceramic fiber blanket insulation is sandwiched between two 0.019" thick 304 stainless steel walls.  Compared to our competitors 430 stainless steel or galvanized steel, 304 stainless steel provides superior corrosion resistance while our 0.019" thick inner and outer walls are as must as 25% thicker than our competition.

• Inner wall 0.019"-thickness 304 stainless steel
• Outer wall is 0.019"-thickness 304 stainless steel
• High Density Ceramic Fiber Insulation is 1.18" thick
• Precision Engineered Twist Lock design

Certification

Certified and listed to the ULC S632 standard and designed for appliances that are listed for use with a 2100 Degree Fahrenheit High Temperature chimney system.  It can be used with wood stoves, fireplaces, fireboxes, furnaces, boilers, water heaters, pizza ovens and other residential heating appliances fueled by wood, gas, coal or oil.